How long before a car can return?
The return-to-service time depends on the products, temperature and coating build. The written quote should state pedestrian and vehicle cure windows.
Can old floor paint be coated?
Only if testing shows it is sound and compatible. Failed or unknown coatings are usually removed during preparation.
Can epoxy go in a laundry?
A suitable concrete laundry may be coated, but drainage, moisture, waterproofing interfaces and appliance movement must be considered.
Is epoxy suitable outside?
Only with a system specified for the exposure. Standard interior epoxy should not be assumed suitable for direct sun or weather.
Can work happen outside trading hours?
Staging can be planned around access and cure windows, but each coat still needs the required conditions and time.
Can fixtures stay in place?
Sometimes, but moving fixtures usually produces cleaner edges and a more continuous system. This is confirmed during scope planning.
Is epoxy suitable for forklifts?
It can be, but vehicle type, wheel material, turning, loads, slab condition and coating thickness must be reviewed.
Can you coat an operating warehouse?
Work may be staged, but dust control, access separation and cure times must be planned before installation.
What does full broadcast mean?
Flake is applied to refusal so the wet base coat is fully covered, rather than lightly scattered.
Can the floor be smooth?
The topcoat and scraping process can reduce roughness, but a flake floor retains some texture.
Will my floor match a sample exactly?
No. Samples establish colour and style, while the full floor develops unique movement during installation.
Is metallic epoxy practical in a garage?
It can be, but a full-flake finish may be more forgiving of tyre marks, grit and everyday use.
Can a brand colour be matched?
A close coating colour may be available, but physical samples should be approved because lighting and substrate affect appearance.
How is downtime managed?
Preparation, coat windows and cure time are scheduled around the available closure period.
Is every epoxy suitable for a commercial kitchen?
No. Heat, oils, washdown, chemicals and slip risk must be assessed; a specialist resin system may be required.
Can coving be installed?
Yes, where the specification and substrate allow it.
Why not acid etch instead?
Mechanical preparation gives more controlled removal and profiling for many professional coating systems. The exact method still depends on the substrate.
Will grinding remove all cracks?
No. Cracks are defects to assess and treat; moving or structural cracks may reappear.